Reviews : Testors Spray High Gloss Clear 3 oz

This is a great Clear Coat...but rather than go thru all the different sheets of polishing to get that wet look buy a bottle of McGuire's #3 Machine Glaze,using just a drop or two and a Kleenex folded 4 times,repeat 2 possibly 3 times,once you have that almost mirror look polish with a clean Kleenex and then do the same process with McGuire's #7 Show Car Glaze Glaze... You'll have a finish that everyone will envy!!!

I tried this on a WW2 aircraft recently. It sealed-in two camo colors on the plane. The gloss finish looked kinda cool. I decaled it and reapplied the High Gloss Clear. It does catch the eye. It's going to stay like that--it's finished.

I like to warm up the can by putting it in the sun light or in warm water so it sprays up nicer. Give a couple of days to cure. I usually put on 2 coats and let it tack up in between coats.

this is a great clear coat. Give your model a glass like finish with this clear. Easy to spot where its been applied to. It is easy to apply.

This paint out of the can is the best if you want a high shine without polishing. Jest a little practice just before it starts to run.

i use this product on every project as a finishing touch to a paint job. very easy to use, lays down really good

Model Master paints cannot go wrong. Very dependable product